| ACCESSORY |
DESCRIPTION |
ORDERING
PART NUMBER |
| Man-Machine Interface |
Provides the ability to print statements on the terminal and receive input from a terminal. |
IWS30SE
IWS120SE |
| External Wiring Card |
A screw terminal breakout board provides easy access to wire I/O and RS232/485
communications.It easily plugs into the connectors on front of the unit.
|
XWC-D6i |
| BCD Switch |
A BCD switch can be connected to a
Warpdrive controller for entry of BCD data. Applications for this function include moving to a set position, selecting
move distance, or a speed.
|
221157-002
(This kit includes a seven-digit plus
sign BCD switch and an 18-inch long ribbon cable.) |
| Encoder Cable |
For closed loop operation, the following encoder cables |
For a 9-pin "D" male connector on both
can be used with an encoder motor and a Warpdrive. ends, use part numbers:
215851-002 10-ft. encoder
cable
215851-003 25-ft. encoder cable
For a 9-pin "D" male connector on one
end, unterminated leads on the other,
use part numbers:
220170-001 10-ft. encoder cable
220170-002 25-ft. encoder cable |
| Motor Cable |
A 10-ft. motor cable is shipped with every
Warpdrive SS2000D6i. For other lengths, use the following part numbers:
|
216022-031
10-ft. motor cable
216022-032 25-ft. motor cable
216022-033 50-ft. motor cable
216022-034 75-ft. motor cable
216022-035 100-ft. motor cable |
Back