ELECTRO SALES CO., INC.
Phone: (617) 666-0500   Fax: (617) 628-2800
Warner Electric / DANA SLO-SYN ®  Servo & Step Motor and Control

NEW!     
TD/TDC Series Brushless Servo Systems                    ***  Discontinued    ***

  

The Logical Transition from Stepper to Servo

  • Provide cost effective transition from Stepper to Brushless DC servo performance
  • Two families: Servo Amplifiers and Servo Amplifiers with Integral Positioning Controller
  • Both packages include power supply; operate directly off-the-line, 95-264VAC
  • Continuous current ratings of 4 amps and 8 amps (8 amps and 16 amps peak)
  • Accept standard +/-10 VDC analog torque input
  • Available with new SLO-SYN NEMA 23, 34, and 42 frame size Servo motors for easy Stepper conversion
  • Compatible with Brushless DC Servo motors using Hall effects or encoder with commutation tracks
  • Systems provide typical torque outputs from 5 in-lb to 120 in-lb.
  • Compact, cost effective, stand-alone products
  • Designed to meet UL, CUL, and CE requirements


Description

The SLO-SYN TD and TDC Series of Brushless DC Servo Products provide a logical, cost effective transition from Stepper to Servo performance. Applications once satisfied with stepper systems can now be upgraded to higher levels of performance under true, closed loop, brushless DC Servo control.

Available as stand-alone, compact packages, the TD Series are DC Servo Amplifiers, while the TDC Series combine the Servo Amplifier with an integral positioning control. Both series operate directly off-the-line with input voltages from 95 VAC to 264 VAC, 50/60 Hz. They are available in 4 or 8 amp continuous current ratings with peak currents to 16 amps. Both operate with a bus voltage up to 330 VDC for optimum speed/torque performance.

A full line of compatible, NEMA frame size 23, 34, and 42 Brushless DC Servo motors are available with continuous output torques ranging form 5 in-lb, to 120 in-lb. Speed range is up to 5000 RPM.

Specifications     Pdf Available

--- TD Servo Amplifier TDC Servo Positioning System
--- TD330/04 TD330/08 TDC330/04 TDC330/08
Continuous Current Capability 4 Amps 8 Amps 4 Amps 8 Amps
Peak Current Capability 8 Amps 16 Amps 8 Amps 16 Amps
Torque Command +/-10 VDC +/-10 VDC --- ---
AC Input 95-264 VAC 95-264 VAC 95-264 VAC 95-264 VAC
Rated Bus Voltage (@230 VAC) 330 VDC 330 VDC 330 VDC 330 VDC
Switching Frequency 15 kHz 15 kHz 15 kHz 15 kHz
Operating Mode Current Current --- ---
Programming --- --- BASIC-like language,
complete with Windows-based
Software Development Environment
for easy programming on a PC
Encoder Input --- --- Differential or Single Ended TTL
Serial Communication --- --- 2 Channels RS232/485 Up to 38 kBaud
Optically Isolated I/O --- --- 10 Inputs, 2 Outputs, Sink or Source Selectable
Analog Input --- --- 10 Bits, +/-10 Volts
BCD Interface --- --- Built-in with Separate Connector
LED Indicators Over Voltage, Over Current, Power Regen, Over Temp usy, Fault
 

Dimensions & Weights

Model Depth Width Height Wt. (lb)
TD 8 2.9 10.7 7
TDC 8 3.8 10.7 8.5

Dimensions for reference only

  

Performance
When matched to appropriate SLO-SYN brushless DC servo motor
Speed: To 5000 RPM
Torque: To 120 in-lb (continuous) --- To 240 in-lb (peak)

More to come on this product.

 

More Details?
Call at 617-666-0500 or Toll free: 888-787-0500

UPBack

Copyright © 2001 Electro sales Co., Inc.
Designed and maintained by webmaster@electrosales.com

Part of the Superior Electric website   © Copyright 1998 Dana Corporation · All rights reserved.
Questions and comments about this site can be directed to our webmaster webmaster@electrosales.com